Finishing Machine

The Most Versatile capable of shrinking medium, light weight cottons to heaviest denims and cottonblend suiting & shirting.

By means of watering cotton, terylene, hemp and its blends in order to shrink the fabric to meet the requirements of shrinkage, stabilization and improve the hand touch.

Compressive shrinking is normally the last process in the sequence of fabric finishing. The woven fabric processed in the machine is fully shrunk. Before the compressive shrinking, it is advisable to establish the width at which the fabric should be shrunk in length to meet with the requirement of the garment makers.

The sole purpose of controlled compressive shrinking process is to ensure that the garment made from such fabric does not shrink after the wash hence perfect dimensional stability. As per standard, +/- 1% residual shrinkage is acceptable.

THAKORE EXPORTS branded Controlled Compressive Shrinking Range available upto 3200 mm Working Widthassures total shrinkage protection to woven fabrics. Be it 100% cotton, cotton/ polyester, cotton/ viscose or tough and heaviest fabrics like denim. The range is so designed that the shrinkage up to 12 % can be achieved in a single passage.

Salient Features:

* A.C Frequency conversion transmission, design speed : 10-80 Meters / Minute.

* Shrinkage 0-12% depending upon the fabric quality.

* Minimum and controlled tension.

* Imported Rubber Blanket and Polyester Felt can be provided optionally.

* Jacketed Drum can be supplied in 1500 mm , 2000 mm and 2500 mm Diameters.

* Stainless Steel Damping & Conditioning Unit supplied as standard parts.

* Rotodamp Unit is optional.

* P L C Control System is optional.

Salient Features:

* Ensuring Required Shrinkage of 14 Ounce Denim in Single Run at a speed of 40 to 50 Meters / Minute.

* Matching all parameters of shrinkage, Feel, Warp & Weft Tension.

* Complete Machine with PLC Controlled Inverter Drive.

* Large Touch Screen. showing Shrinkage, Speed and other Data, Minimum Usage of steam as well as power.

* Userfriendly machine with shortest Payback Period.

Can Finish Lycra Fabrics in single run with required weft & warp shrinkage at the speed of 40 meters / minute.

Specially designed heavy warp pull to control the width of the fabric and warp pull controlled by PLC.

Motorized Antiskew Device to control Skew setting of fabric twill by forwarding and reversing movement of motors.

Specially Designed Shrinking Unit to achieve shrinkage upto 14% depending upon the quality of the fabric with residuyal shrinkage at 1%.

2500 mm Diameter Mirror Polished Jacketed main Palmer Cylinder with rotary joint is provided.

2 Nos. of cooling cylinders provided at the exit of the Palmer Unit to cool down the fabrics.

Optional :

* Singeing Unit at the Feeding side.

* Brushing Unit at the Feeding side.

* Temperature controlling of shrinkage and Palmer Unit by PLC.

* Big-Batching Device with "J"-Scray at the Plaiting side.